Instant Quote

 

 

Were you hunting for critical information on No Hot Water — Water Heater Repair?

Several modern homes use an electrical water heater for their heating unit, as a result of its ease and simplicity of use. Nevertheless, similar to any other electric appliances, problems may develop with its use, unexpectedly. It can be really discouraging to get up to a chilly shower rather than a warm one or having your bathroom with water that isn't warm enough or even as well warm. Whatever the instance might be, hot water heater problems can be quite nerve-racking. Thankfully, we've made a listing of possible options to your hot water heater concerns. There are a variety of variables that can create many of these problems, it could be an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you shut off the primary power supply for security. Whatever the issue is, getting it fixed need to not pose too much of an issue if you follow these actions:

 

Examine Your Power Supply:

As standard as this might appear, it is really essential. Without ample power, your hot water heater will certainly not work. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power issue. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, just turn it off and on again. Replace any kind of busted or damaged fuse. Check the home appliance with power after these modifications to see if it's now functioning.

 

Examine the Burner in the Water Heater:

If it's not a power problem, then attempt looking into your heating element if it is still working. Test each of your burner to make sure the issue isn't with any of them. If any one of them is damaged, change that part and then examine whether the warm water is back on.

 

Inspect Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot enough, you might need to check the temperature setups on your upper thermostat. Ensure the breaker is turned off before doing anything. Open up the gain access to panel as well as press the red button for temperature level reset above the thermostat. This should aid heat up the water. Turn the circuit breaker back on and examine if the issue has been solved.

 

Call An Expert:

If after replacing all damaged components and also resetting your temperature level, the water heater still isn't functioning, you may require to call an expert plumber for a specialist opinion. The trouble with your heating unit could be that the cold and hot taps have actually been changed or it might be undersized for the amount of warm water needed in your house. Whatever the situation might be, an expert plumber would certainly assist solve the issue.

 

Conclusion

Hot water heater problems are not constantly major. Much of them are due to minor concerns like a blown fuse or worn-out burner. Replacing the damaged parts need to do the trick. Nonetheless, if you are still incapable to resolve the trouble, give a call to your closest plumber ahead to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Do you enjoy reading up on How to Troubleshoot and Repair an Electric Water Heater? Post a remark directly below. We'd be delighted to find out your opinion about this content. We hope to see you back again in the near future. Enjoyed reading our post? Please share it. Let other people check it out. We recognize the value of reading our article about How to Troubleshoot and Repair an Electric Water Heater.

Check It Out